Skip to content
is here! Shop now, pay later in 4 easy instalments

KCD11 10x15mm Mini Rocker Switch – ON/OFF, 3A 250VAC

Brand NZN Electronics CLICK IT SKU CLICK-IT-869247 Category Switches

(0 reviews)

  • Brand NZN Electronics

Verified specifications

Brand
NZN Electronics

Taken from this product's published details. If something is not listed here, it has not been verified.

Ask AI about this product

Answers use this product's information and the store's details. If it cannot be confirmed, it will point you to our team.

Any language. Press Enter to ask

View full specs

Overview

A small black KCD11 rocker switch for simple ON/OFF control where panel space is tight. The front face is only 15 x 10.5 mm, it snaps into a panel cut-out, and it has two non-polarised blade lugs. It is marked 3 A at 250 VAC or 6 A at 125 VAC. Need more current or a bigger switch face? Choose our KCD1 21 x 15 mm rocker switch, marked 6 A at 250 VAC.

Specifications

Model markingKCD11
Contact configurationSPST
Switch actionMaintained ON/OFF
Rating marked3 A 250 VAC
Alternate marking6 A 125 VAC
Terminals2 blade / solder lugs
Front face15.0 x 10.5 mm
Overall height16.5 mm including lugs
MountingSnap-in panel clips
IlluminationNone
ColourBlack, I / O marked
WeightAbout 1.3 g

Datasheets

What’s in the box

1×
KCD11 10 x 15 mm mini rocker switch

Black, non-illuminated, two-lug SPST version.

Great for

A power switch on a small 3D-printed project box
Turning an LED strip or fan on and off
Replacing a worn mini rocker in a small appliance
Front panels with little spare room

Wiring & getting started

  1. Cut the panel opening

    Cut a rectangle that fits the body under the 15 x 10.5 mm bezel. Start slightly small and file until the switch clicks in and the clips hold it firmly.

  2. Connect the switched wire

    Connect one side of the wire being switched to each lug by soldering it to the lug. The lugs are not polarised.

  3. Check the switch

    Press I to close the contact and O to open it. Isolate power before checking or changing the wiring.

Note: Only AC ratings are marked on this switch. For 230 V mains loads stay within 3 A, switch the active conductor, use insulated connections and an enclosure, and have mains installation done by a suitably qualified person.

Specification

Specification for KCD11 10x15mm Mini Rocker Switch - ON/OFF, 3A 250VAC
CLICK IT SKU CLICK-IT-869247
Brand NZN Electronics

Features

A small black KCD11 rocker switch for simple ON/OFF control where panel space is tight. The front face is only 15 x 10.5 mm, it snaps into a panel cut-out, and it has two non-polarised blade lugs. It is marked 3 A at 250 VAC…

  • Brand NZN Electronics

Reviews

No reviews yet.

Be the first to review this product and help other shoppers decide.

Do you own this product?

Only logged in customers who have purchased this product may leave a review.

Combo deals: buy together and save!

Add these products in one go - the total updates as you tick each item.

  • In stock $1.61
  • In stock $22.08
  • In stock $2.19
  • In stock $0.69