Skip to content
is here! Shop now, pay later in 4 easy instalments

RXEF110 Resettable PTC Fuse – 1.1A Hold, 72V Radial Polyfuse

Brand Littelfuse CLICK IT SKU CLICK-IT-990317 Category Electrical & Lighting

(0 reviews)

  • Brand Littelfuse

Verified specifications

Brand
Littelfuse

Taken from this product's published details. If something is not listed here, it has not been verified.

Ask AI about this product

Answers use this product's information and the store's details. If it cannot be confirmed, it will point you to our team.

Any language. Press Enter to ask

View full specs

Overview

The Littelfuse RXEF110 is a resettable PTC fuse, often called a polyfuse, for low-voltage DC and AC circuits up to 72V. It carries 1.1A continuously at 20°C and trips at 2.2A or more, limiting the current to a trickle until the fault is cleared. Once power is removed and it cools, it resets by itself, so a short on a 12V or 24V project, a motor stall or a wiring mistake does not leave you hunting for a spare fuse.

Specifications

Part numberLittelfuse PolySwitch RXEF110, marked X110
TypeResettable PPTC fuse, radial leaded, not polarised
Hold current1.10A at 20°C (0.89A at 40°C, 0.69A at 60°C)
Trip current2.20A at 20°C
Maximum voltage72V DC or 72V AC rms
Maximum fault current40A at rated voltage
Time to trip8.2 seconds maximum at 5.5A, 20°C
Resistance0.15 to 0.25 ohm new, up to 0.38 ohm one hour after a trip
Power while tripped1.5W typical
Operating temperature-40°C to 85°C
Body12.8mm wide and 3.0mm thick maximum, flame-retardant epoxy (UL94 V-0)
Leads2 tin-plated copper, 0.81mm (20 AWG), about 5mm spacing

Full technical datasheet, derating table and dimensions
PDF

What’s in the box

5+
RXEF110 resettable fuses

Sold per fuse with a minimum of 5. You receive the quantity you order, loose in a clear bag.

Great for

Protecting the 12V feed to an LED strip or fan
Short-circuit protection on a breadboard power rail
Fusing a small DC motor or pump circuit
Guarding a 5V USB-powered Arduino or ESP32 build
Sensor, alarm and control wiring up to 24V
Protecting the output of a small 24V power supply

Wiring & getting started

  1. Check the size

    Your circuit’s normal current must stay below the hold current at the hottest temperature the fuse will sit in: 1.1A at 20°C, 0.89A at 40°C, 0.69A at 60°C. A fault needs to draw 2.2A or more to trip it.

  2. Wire it in series

    Fit it in the positive supply line, as close to the power source as you can. Either lead can go to the supply side.

  3. Solder by hand

    The leads take normal hand or wave soldering. Keep it out of reflow ovens and away from hot parts, as extra heat lowers the current it will hold.

  4. Resetting after a trip

    A tripped fuse runs warm and passes only a small current. Remove the power or clear the fault, let it cool and it is ready to use again.

Note: For low-voltage circuits only. Never use it on 230V mains wiring, and keep the possible short-circuit current at or below 40A.

Specification

Specification for RXEF110 Resettable PTC Fuse - 1.1A Hold, 72V Radial Polyfuse
CLICK IT SKU CLICK-IT-990317
Brand Littelfuse

Features

The Littelfuse RXEF110 is a resettable PTC fuse, often called a polyfuse, for low-voltage DC and AC circuits up to 72V. It carries 1.1A continuously at 20°C and trips at 2.2A or more, limiting the current to a trickle until the fault is cleared. Once…

  • Brand Littelfuse

Reviews

No reviews yet.

Be the first to review this product and help other shoppers decide.

Do you own this product?

Only logged in customers who have purchased this product may leave a review.

Combo deals: buy together and save!

Add these products in one go - the total updates as you tick each item.

  • In stock $1.38
  • In stock $49.19
  • In stock $38.53
  • In stock $8.30