Skip to content
is here! Shop now, pay later in 4 easy installments
Shop Account Wishlist Cart 4

Piggyback Spade Terminals 6.3mm – Red, Blue (PBDD1.25-250, PBDD2-250) – Red 0.5-1.5mm²

Piggyback Spade Terminals 6.3mm – Red, Blue (PBDD1.25-250, PBDD2-250) – Red 0.5-1.5mm² to Pinterest (opens in a new window)
Piggyback Spade Terminals 6.3mm - Red, Blue (PBDD1.25-250, PBDD2-250) - Red 0.5-1.5mm²

Brand NZN Electronics CLICK IT SKU CLICK-IT-161826 Category Components

(0 reviews)

  • Brand NZN Electronics

Verified specifications

Brand
NZN Electronics

Taken from this product's published details. If something is not listed here, it has not been verified.

Ask AI about this product

Answers use this product's information and the store's details. If it cannot be confirmed, it will point you to our team.

Any language. Press Enter to ask

Frequently bought together

Bundle idea: this item plus 1 recommended accessory/accessories, $2.19 in total. Add each item to the cart below.

View full specs

Complete your setup

Overview

Piggyback spade crimp terminals let you connect two wires to one 6.3 mm male tab. The female receptacle pushes onto the device tab, and a second 6.3 mm male tab on its back takes another female spade, such as our FDD1.25-250 female spade terminals. Pick the colour by wire size: red PBDD1.25-250 for 0.5-1.5 mm² wire, blue PBDD2-250 for 1.5-2.5 mm². To add a plug-apart joint in a single wire instead, use our MDD1.25-250 male spade terminals with the FDD.

Specifications

ModelsPBDD1.25-250 red, PBDD2-250 blue
Connection typePiggyback spade quick disconnect, crimp
Receptacle fits6.3 x 0.8 mm male tab, width x thickness
Piggyback tab accepts6.3 mm (250 series) female spade
Red wire size0.5-1.5 mm² conductor
Blue wire size1.5-2.5 mm² conductor
Insulation coverageSleeve over the wire barrel, contacts exposed
Size21.5 mm long without the angled tab, 7.4 mm wide
Purchase unitOne terminal, minimum 2

Datasheets

Full technical datasheet
PDF

Great for

Running a second wire from a switch or relay tab that has only one terminal
Teeing a 12V accessory into an existing spade connection
Adding a feed to a fuse holder or lamp without cutting the old wire

Wiring & getting started

  1. Check the sizes with power off

    The device tab must be 6.3 x 0.8 mm. Choose red for wire with a 0.5 to 1.5 mm² conductor and blue for 1.5 to 2.5 mm². Thinner wire in a blue terminal won’t crimp tight, so use red for it.

  2. Strip and crimp

    Use a crimping tool with the die colour that matches the sleeve. Strip to the length of the wire barrel without cutting strands, push the conductor fully in, then crimp the sleeve. Tug test the wire.

  3. Fit both connections

    Push the receptacle fully onto the device tab; it should take a firm push. A terminal that slides on loosely will heat up, so replace it. Then push the second female spade onto the piggyback tab. Both wires now share the device tab, so add the two loads together and make sure that tab and its circuit can carry the total.

  4. Adjust and cover

    The piggyback tab is angled to give the second terminal room. If it needs to clear a nearby part, bend it gently once, as repeated bending can crack it. The receptacle and tab are bare metal, so cover them if they could touch other conductors or be touched while powered.

Specification

Specification for Piggyback Spade Terminals 6.3mm - Red, Blue (PBDD1.25-250, PBDD2-250) - Red 0.5-1.5mm²
CLICK IT SKU CLICK-IT-161826
Brand NZN Electronics

Features

Piggyback spade crimp terminals let you connect two wires to one 6.3 mm male tab. The female receptacle pushes onto the device tab, and a second 6.3 mm male tab on its back takes another female spade, such as our FDD1.25-250 female spade terminals. Pick…

  • Brand NZN Electronics

Reviews

No reviews yet.

Be the first to review this product and help other shoppers decide.

Do you own this product?

Only logged in customers who have purchased this product may leave a review.

Combo deals: buy together and save!

Add these products in one go - the total updates as you tick each item.

  • In stock $0.92
  • In stock $6.67
  • In stock $6.67
  • In stock $6.67

Related products

Related Promotions

View All Promotions