
BT Master Adapter incorporating BT Socket to RJ45 Plug
4 payments of $1.89 with 
Taken from this product's published details. If something is not listed here, it has not been verified.
Answers use this product's information and the store's details. If it cannot be confirmed, it will point you to our team.
Any language. Press Enter to ask

4 payments of $1.89 with 

Bundle idea: this item plus 2 recommended accessory/accessories, $17.38 in total. Add each item to the cart below.

4 payments of $0.53 with 

A 4-channel bidirectional logic level converter for joining 3.3V and 5V boards, such as a 5V Arduino Uno and a 3.3V sensor, or an ESP32 and a 5V module. Each channel uses a BSS138-type MOSFET with 10 kΩ pull-ups on both sides, so it shifts I2C, UART serial and slow SPI signals in either direction. You power the low side (LV) from the lower voltage and the high side (HV) from the higher one. Two 6-pin headers come loose in the bag.
Header holes empty, ready to solder.
Loose. Jumper wires and the boards you are joining are not included.
Solder the two 6-pin headers, long pins down, to plug the board into a breadboard or onto female jumper wires.
HV to the higher supply (5V), LV to the lower one (3.3V), and GND to the ground of both boards. Both HV and LV must be connected or nothing converts.
Use the same channel number on each side: for an Uno and a 3.3V I2C sensor, A4 (SDA) to HV1 and LV1 to the sensor’s SDA, then A5 (SCL) to HV2 and LV2 to SCL. The BMP280 3.3V sensor and Dupont jumper wires suit this.
Upload the I2C scan sketch from the Quick Start and open the Serial Monitor at 9600 baud. The sensor’s address prints, for example 0x76.
| CLICK IT SKU | CLICK-IT-474741 |
|---|---|
| Brand | NZN Electronics |
A 4-channel bidirectional logic level converter for joining 3.3V and 5V boards, such as a 5V Arduino Uno and a 3.3V sensor, or an ESP32 and a 5V module. Each channel uses a BSS138-type MOSFET with 10 kΩ pull-ups on both sides, so it shifts…
Only logged in customers who have purchased this product may leave a review.
Add these products in one go - the total updates as you tick each item.
Save 12%
HDMI KVM Extender Over Single Cat5E/6 up to 120M…
Original price was: $444.25.$390.94Current price is: $390.94. incl. gst
Save 12%
1-In-2-Out 4K@30Hz HDMI Extender 1x HDMI 2x RJ45 out…
Original price was: $410.76.$361.47Current price is: $361.47. incl. gst
Describe it in your own words - we match it to what is in stock at Click IT today.
How it works