is here! Shop now, pay later in 4 easy installments
DeliveryNZ-wide
RLEIL RL1-3 Rocker Switch 30x11mm Cut-out – ON/OFF, 10A 250VAC – Clearance to Pinterest (opens in a new window)

RLEIL RL1-3 Rocker Switch 30x11mm Cut-out – ON/OFF, 10A 250VAC – Clearance

$4.49 incl. gst

SKU: CLICK-IT-724893 Category:

Verified specifications

Brand
RLEIL

Taken from this product's published details. If something is not listed here, it has not been verified.

Ask AI about this product

Answers use this product's information and the store's details. If it cannot be confirmed, it will point you to our team.

Any language. Press Enter to ask

Frequently bought together

Bundle idea: this item plus 2 recommended accessory/accessories, $15.09 in total. Add each item to the cart below.

Description

Clearance – final unit. This is one brand-new switch from older stock, not a second, and our 12 month warranty still applies. We won’t be restocking this model. If you need more than one, or a rocker we keep on the shelf, see our KCD1 21x15mm rocker switch (it needs a smaller 18.8 x 12.7 mm hole).

A rocker switch is the panel-mounted ON/OFF switch you see on heaters, fans, power tools and bench gear. This one is a full-size RLEIL RL1-3 single-pole switch that clicks into a 30 x 11 mm rectangular hole and breaks one wire: press I to turn the circuit on and O to turn it off. It is moulded with a 10(4)A 250VAC rating, which means up to 10 A on a heater or lamp load and up to 4 A on a motor at 230V.

That 30 x 11 mm hole is a common size on appliances and equipment, so it suits replacing a worn or broken rocker as well as fitting a new project box. The two 6.3 mm quick-connect tabs take standard insulated female spade connectors, so it wires up without soldering, or you can solder wires straight to the tabs. Measure the hole in your panel first: if the old switch has three tabs or lights up, it is a different type.

Specifications

Model markingRLEIL RL1-3
Contact typeSPST, maintained ON/OFF
Rating at 250VAC10(4)A: 10 A resistive, 4 A motor
Second marked rating15A 125VAC / 7.5A 250VAC
Temperature markingT125/55
Panel cut-out30 x 11 mm
Bezel (front face)32 x 14 mm
Depth behind panel16.6 mm body + 10 mm tabs
Terminals2 x 6.3 mm quick-connect tabs (1 and 2)
MountingSnap-in clips on both ends
RockerBlack, white I / O, not lit
In the box1 switch

Datasheets

Wiring & getting started

  1. Check the hole

    The switch needs a 30 x 11 mm rectangular cut-out. Cut it slightly small and file it out until the body slides in with a firm push.

  2. Wire the two tabs

    With the power unplugged, push an insulated 6.3 mm female connector onto each tab, one on the incoming wire and one on the wire going to the load. The tabs are not polarised, so either way round works. On a mains appliance, switch the active (brown) wire.

  3. Clip it in and check it works

    Push the switch in from the front until the clips on both ends snap behind the panel. With I pressed the circuit is on and with O pressed it is off. Check it with a meter or the load before closing the case.

Note: On 230V mains, unplug the appliance before working on it and use fully insulated connectors so no bare metal is left on the tabs. If you are not confident with mains wiring, have a qualified person fit the switch.

Additional information

Brand

RLEIL

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

We’d love to hear what you think!