Description
The MPD1.25-156 is a red male bullet crimp connector with a 4 mm bullet and a slotted spring tip. It pushes into a matching 4 mm female bullet, such as a red FRD1.25-156, to make a joint you can pull apart later. The red sleeve covers the crimp barrel and suits wire from 0.5 to 1.5 mm².
Specifications
Datasheets
What’s in the box
Sold individually. Minimum order: 5 connectors. Your selected quantity is supplied together. Female bullets are not included.
Great for
Wiring & getting started
-
Check the sizes with power off
Use wire with a conductor of 0.5 to 1.5 mm² and check that its insulation fits the red sleeve. The female half must be a 4 mm bullet of the same series.
-
Strip and crimp
Use a crimping tool and die made for insulated terminals and your wire size. Strip to the length of the wire barrel without cutting strands, push the conductor fully in, then crimp the red barrel.
-
Inspect and join
Check for loose strands or a split sleeve and give the wire a firm tug. Push the bullet fully into the female until the sleeves meet.
-
Keep the bullet covered
The bullet is bare metal. Put it on the side of the circuit that is not live when unplugged, usually the load side, and cover the joint if it could touch other conductors.
Reviews
There are no reviews yet.