Description
Plain flat washers in 304 stainless steel, sold individually in M2, M3, M4 and M5. They follow the standard DIN 125-A metric sizes, so each one matches the hex nuts and screws of the same number. Put one under a screw head or nut to spread the load, stop it biting into plastic or a soft PCB, or pack out a gap. Stainless means they can go outdoors or anywhere damp without rusting.
Size chart
| Size | Fits screw | Hole | Outside diameter | Thickness |
|---|---|---|---|---|
| M2 | M2 | 2.2 mm | 5 mm | 0.3 mm |
| M3 | M3 | 3.2 mm | 7 mm | 0.5 mm |
| M4 | M4 | 4.3 mm | 9 mm | 0.8 mm |
| M5 | M5 | 5.3 mm | 10 mm | 1.0 mm |
Specifications
What’s in the box
Price is per washer. Order the quantity you need and they arrive loose in a labelled bag, dispatched within 24 hours.
Great for
Choosing the right size
-
Match the number to the screw
An M3 screw takes an M3 washer. The hole is a little bigger than the screw so it slides straight on, and the number is the screw size, not the washer’s outside diameter.
-
Check the space around the hole
The outside diameter runs from 5 mm on the M2 to 10 mm on the M5. On a crowded PCB, make sure the washer clears nearby parts and tracks around the mounting hole.
-
One under the head, one under the nut
On soft material such as plastic, wood or a 3D print, use a washer on both sides so neither the screw head nor the nut pulls into the surface.
Note: A flat washer spreads the load but does not stop a nut working loose. On anything that vibrates, add a second nut as a locknut or use a nylon insert lock nut.
Reviews
There are no reviews yet.