Description
Fully insulated female spade crimp terminals in three wire sizes: red FDFD1.25-250 for 0.5 to 1.5 mm² wire, blue FDFD2-250 for 1.5 to 2.5 mm² and yellow FDFD5.5-250 for heavier 4 to 6 mm² cable. All three push onto a 6.3 x 0.8 mm male tab, and the sleeve covers the whole terminal, so no bare metal shows once it is fitted. Pick the colour that matches your wire. To join two red-size wires with a plug-apart joint, pair them with our red MDD1.25-250 male spade terminals.
Specifications
Datasheets
What’s in the box
Sold individually. Minimum order: 5 terminals of a colour. Your selected quantity is supplied together.
Great for
Wiring & getting started
-
Check the sizes with power off
The tab must be 6.3 x 0.8 mm. Smaller 4.8 mm and 2.8 mm tabs also exist and will be loose. Use red for 0.5 to 1.5 mm² conductor, blue for 1.5 to 2.5 mm² and yellow for 4 to 6 mm².
-
Strip and crimp
Use a crimping tool with a die for insulated terminals, in the red, blue or yellow position to match the terminal. Strip to the length of the wire barrel without cutting strands, push the conductor in through the wire end, then crimp the barrel section of the sleeve.
-
Inspect and fit
Check for loose strands or a split sleeve and give the wire a firm tug. Push the terminal straight onto the tab until it is fully seated.
Reviews
There are no reviews yet.