XH 2.5mm PCB Header 2, 3 or 6 Pin, Vertical Through-Hole (JST-XH Compatible) – 6-pin
- Brand NZN Electronics
Verified specifications
- Brand
- NZN Electronics
Taken from this product's published details. If something is not listed here, it has not been verified.
Ask AI about this product
Answers use this product's information and the store's details. If it cannot be confirmed, it will point you to our team.
Any language. Press Enter to ask
Overview
XH 2.5mm PCB headers in 2-pin, 3-pin and 6-pin sizes, the board half of the common white XH wire-to-board connector. The pins go straight through the board and are soldered underneath, and the shrouded top takes an XH plug that latches on one side, so it only goes in one way. The 2-pin suits fans, LEDs and other 2-wire leads, the 3-pin suits 2S LiPo balance leads and 3-wire sensors, and the 6-pin suits 5S balance leads and 6-wire harnesses.
Specifications
Datasheets
What’s in the box
Loose headers, as many as you order. Plug housings and crimp terminals are not included.
Great for
Wiring & getting started
-
Pick the size
Count the wires on your plug: 2 wires need the 2-pin header, 3 wires the 3-pin and 6 wires the 6-pin.
-
Face the latch the right way
The slotted wall is the latch side. Turn the header so the plug’s latch faces that wall with the wires in the order your board expects; it will not go in the other way round.
-
Solder it
Push it down flat on the board, solder one end pin, check it sits square, then solder the rest. Keep the iron on each joint only long enough for the solder to flow.
-
Make the cable
Crimp XH terminals onto 22 to 28 AWG wire and click them into a matching XH housing, such as our 3, 5 and 6-way XH housings, then push it onto the header until it latches.
Note: XH (2.5mm) is a different size from PH (2.0mm). A PH plug will not fit these headers.
Specification
| CLICK IT SKU | CLICK-IT-379965 |
|---|---|
| Brand | NZN Electronics |
Features
XH 2.5mm PCB headers in 2-pin, 3-pin and 6-pin sizes, the board half of the common white XH wire-to-board connector. The pins go straight through the board and are soldered underneath, and the shrouded top takes an XH plug that latches on one side, so…
- Brand NZN Electronics
Reviews
Do you own this product?
Only logged in customers who have purchased this product may leave a review.
Combo deals: buy together and save!
Add these products in one go - the total updates as you tick each item.