JIU YE FENG JYF-50S 50mm Inline Duct Fan 12V 6W
- Brand JIU YE FENG
Verified specifications
- Screen
- 2 inch
- Brand
- JIU YE FENG
Taken from this product's published details. If something is not listed here, it has not been verified.
Ask AI about this product
Answers use this product's information and the store's details. If it cannot be confirmed, it will point you to our team.
Any language. Press Enter to ask
Overview
A JYF-50S inline fan that sits in a run of 50mm (2 inch) pipe or hose and pulls air through it at up to 36 m³/h, about 21 CFM. That is the right size for venting a 3D printer enclosure, an electronics cabinet, a battery box or a composting toilet, and too small for a grow tent or bathroom. It runs from 12V DC at 6W, so a 12V plug pack or a 12V battery powers it. No power supply comes with it: the short lead ends in a female DC barrel socket, ready for a 12V supply with a barrel plug.
Specifications
Datasheets
Wiring & getting started
-
Pick a 12V supply
Use a 12V DC plug pack rated 1 A or more with a barrel plug that fits the fan’s socket, or a 12V battery. To wire it to a battery or screw terminals, our barrel jack screw terminal adapter comes in both common barrel sizes, 5.5×2.1mm and 5.5×2.5mm. A solar panel on its own runs at around 18 to 22V, so connect the fan to the battery or the controller’s 12V load output, not straight to the panel.
-
Point the arrow the way the air should go
The arrow on the label shows the airflow, and the fan only blows that way. To pull air out of a box, the arrow points away from the box. Join it to your 50mm hose or pipe with a hose clamp, a rubber coupling or tape, so air cannot leak around the joint.
-
Power up and set the speed
At 12V it runs at full speed with a noticeable high-pitched whine. If you need it quieter, run it from a lower voltage, for example from an adjustable step-down converter: it slows down and gets much quieter, while still moving air through the pipe.
Specification
| CLICK IT SKU | CLICK-IT-968275 |
|---|---|
| Brand | JIU YE FENG |
Features
A JYF-50S inline fan that sits in a run of 50mm (2 inch) pipe or hose and pulls air through it at up to 36 m³/h, about 21 CFM. That is the right size for venting a 3D printer enclosure, an electronics cabinet, a battery…
- Brand JIU YE FENG
Reviews
Do you own this product?
Only logged in customers who have purchased this product may leave a review.
Combo deals: buy together and save!
Add these products in one go - the total updates as you tick each item.